Batch Programming; Introduction - Newland NLS-HR200 User Manual

Batch Programming

Introduction

Batch Programming can integrate a programming sequence into one barcode.
Batch Programming Rules:
1、 Sub-command is in this format: Programming Command + Parameters
2、 Sub-commands are terminated by semicolons. Note that there is no blank
between a sub-command and its terminator semicolon.
3、 "Save Programming"(0000160) to terminate
4、 Use Barcode Generator software to make the 2D batch barcode.
For example, to generate a batch barcode for "Illumination Keep
ON"(0200030), "Auto Mode"(0302010), "One Reading Timeout =
2000"(0313000), and "Disable Fixed Length Selection"(0405140)for Inter-
leaved 2 of 5.
0200030; 0302010; 0313000 = 2000; 0405140; 0000160; Generate a batch code.
nlscan.com
Allow Read Batch Code
【Pro CMD：0001110】
Tools
Code Programming ON
Code Programming OFF
Page 134