Reading - Newland NLS-HR200 User Manual

Getting Start

Reading

1. Ensure Imager, cables and the Host connected, then Power ON;
2. Press & hold Trigger, Illumine LED and Aiming LED cast an Illumine Pattern (red) and an Aiming Pattern
(blue);
3. Keep Aiming Pattern in the center of a bar code. Zoom in and zoom out to allocate the Optimum Reading
Stance.
4. On a successful read, the beep rings, illumination & aiming patterns die out. The Imager then transmit
barcode message to the Host.
5. Experiences tell a certain interval of distance has high successful reading rate. This interval is the Optimum
Reading Stance.
nlscan.com
Page 13