Medium Common Attributes - HP C737990900 Technical Reference Manual

Ultrium drives generation 2 scsi and fc drives volume 3: the scsi interface
Table of Contents

Advertisement

Partition Usage History
Product Serial Number
Total MB Written in Medium
Life
and
Total MB Read in Medium Life
Total MB Written in Current/
and
Last Load
Total MB Read
in Current/Last Load
Medium Usage History
106 Commands
The Partition Usage History attribute provides the same counters as the Medium
Usage History but they apply only to the current partition. Since Ultrium drives
only support a single partition, the values will be the same as in Medium Usage
History.
A vendor-assigned serial number. If the product serial number is not available,
the device server will return ASCII spaces (20h).
The total number of data bytes that are transferred to or from the tape surface
(after any data compression has been applied) over the entire tape life. These
figures are cumulative and will never be reset.
These are similar to the attributes above but apply to the current load (if the tape is
currently loaded) or the last load (if the tape is currently unloaded). The device
server should reset these attributes to zero when the tape is loaded.
This provides statistical counters for the entire tape. If a field is not used it should
be set to zero. The format is as follows:

Medium Common Attributes

These attributes are hard coded into the MAM at manufacture time. The
attributes defined are shown in Table 16. All the attributes are read-only
(Read-Only = 1).
ID
0400h
Medium Manufacturer
0401h
Medium Serial Number
0402h
Medium Length
0403h
Medium Width
0404h
Assigning Organization
0405h
Medium Density Code
0406h
Medium Manufacturer Date
0407h
MAM Capacity
0408h
Medium Type
0409h
Medium Type Information
040Ah – 07FFh
Reserved
The Medium Manufacturer field should contain a value listed in the Vendor
Identification list (see Annex D).
The
Medium Serial Number
medium. The Medium Manufacturer Date specifies the date of manufacture of
the medium. The format is YYYYMMDD.
Attribute Name
identifies the manufacturer's serial number for the
Size in Bytes
Format
8
ASCII
32
ASCII
8
Binary
4
Binary
8
Binary
1
Binary
8
ASCII
8
Binary
1
Binary
2
Binary

Advertisement

Table of Contents
loading

Table of Contents