• Figure 13
Figure 13
Shared Business Copy XP S-VOL/Continuous Access XP P-VOL
CAUTION:
then split (PSUS) before the Continuous Access XP pair is created.
Combining Continuous Access XP and LUN Security XP Extension
You can use Continuous Access XP to create a pair using the volumes that you used LUN Security XP
Extension to set the access attribute. However, you cannot create a Continuous Access XP pair by
specifying a volume that has the S-VOL Disable attribute as an S-VOL.
Table 14 shows whether you can specify a volume with access attribute as a P-VOL or S-VOL of a
Continuous Access XP pair.
Access attribute and availability as a Continuous Access XP pair volume
Table 14
Access attribute
Read/Write
Read Only
Protect
S-VOL Disable
Read Only and S-VOL Disable
Protect and S-VOL Disable
Copying access attributes
If you use LUN Security XP Extension to create a Continuous Access XP pair using the volumes to which the
VMA is set, you can copy the P-VOL's access attribute recorded in the VMA to the S-VOL. You can set the
VMA required to copy the access attribute only to OPEN-V volumes.
For more information about LUN Security XP Extension, see the HP StorageWorks LUN Security XP
Extension user guide.
Table 15
VMA setting and availability of Paircreate operation
P-VOL
Volume with VMA
Volume without VMA
shows an example of a BC S-VOL that is also used as a Continuous Access XP P-VOL.
This configuration requires that the BC pair be established in duplex mode (PAIR) and
Availability as a Continuous Access XP pair volume
P-VOL
OK
OK
OK
OK
OK
OK
S-VOL
Volume with VMA
OK
NO
S-VOL
OK
OK
OK
NO
NO
NO
Volume without VMA
NO
OK
Continuous Access XP user guide for the XP12000/XP10000
43