HP C737990900 Technical Reference Manual page 17

Command
ERASE
INQUIRY
LOAD/UNLOAD
LOCATE
LOG SELECT
LOG SENSE
MODE SELECT
MODE SENSE
PREVENT/ALLOW
MEDIUM REMOVAL
READ
READ BLOCK LIMITS
READ BUFFER
READ POSITION
RECEIVE DIAGNOSTICS
RESULTS
RELEASE UNIT
REQUEST SENSE
status immediately. A
GOOD
An command will return the required data and give
INQUIRY
Long erase is aborted as quickly as possible without corrupting tape format.
Short erase completes.
None
Load completes and logically positions tape at BOT. Unload is aborted
leaving logical position at BOT unless operation is past the "point of no
return" in which case the tape is ejected.
The logical position is set back to that at the start of the operation unless the
operation is past its "point of no return", in which case the operation
completes.
If data transfer is complete, command is completed, otherwise, no action is
taken
None
If data transfer is complete, command is completed, otherwise, no action is
taken.
None
The command completes.
The current position is set to the first record boundary at or after the start of
the current data burst.
None
None
None
None
The command completes.
None
command will give
REQUEST SENSE
Abort Processing
Interface Implementation
.
NO SENSE
status.
GOOD
17