Table of Contents
Advertisement
Maximum Additional
Partitions
Additional Partitions
Defined
FDP
SDP
IDP
POFM
CLEAR
ADDP
Medium Format
recognition
PSUM
Partition Units
Partition Size
Fibre Channel Logical Unit Control Mode Page
0
1
2
3
4–7
86
Commands
None of the fields in this mode page are changeable.
0 Zero is returned, indicating that no additional partitions are present or
supported.
0 Zero must be returned, indicating that no additional partitions are present
or supported.
0 The Fixed Data Partitions bit is not supported and must be set to zero.
0 The Select Data Partitions bit is not supported and must be set to zero.
0 The Initiator Defined Partitions bit is not supported and must be set to zero.
0 The Partitions on Format bit is set to zero since the drive does not support
the
FORMAT MEDIUM
partitioned.
0 Set to zero indicating SCSI-2 compatibility.
0 Set to zero indicating SCSI-2 compatibility.
3 This indicates that the drive is capable of format and partition recognition.
3 Partition Size Unit of Measure: The value of 11b indicates that the units of
measure for the Partition Size descriptor are defined by the Partitions Units
(Partition Units)
field: 10
9 This defines the units of the Partition Size field as 10
in gigabytes.
100 Gen 1 tape loaded
200 Default value. No data cartridge present or Gen 2 tape loaded.
This page is supported for Fibre Channel only:
7
6
PS (0)
Rsvd (0)
command through which the tape could be
bytes.
5
4
3
Page Code {18h}
Page Length {06h)
Reserved (0)
Reserved (0)
Reserved (0)
9
bytes, in other words
2
1
0
EPDC[1]
Advertisement
Table of Contents
