HP C737990900 Technical Reference Manual page 105

Ultrium drives generation 2 scsi and fc drives volume 3: the scsi interface
Table of Contents

Advertisement

Remaining Capacity in Partition
and
Maximum Capacity in Partition
Load Count
MAM Space Remaining
Device Make/Serial Number at Last
and
Load
Device Make/Serial
Number at Load – n
0
7
8
39
Vendor Identification
Product Serial Number
Total MB Written in Medium
and
Life
Total MB Read in Medium Life
Total MB Written in Current/
and
Last Load
Total MB Read
in Current/Last Load
These are native capacities in MB, assuming no data compression.
The number of times this tape has been fully loaded. This parameter should
not be reset by any action of the device server.
The space currently free in the MAM. The total MAM capacity is reported in
the MAM Capacity attribute defined in
page 106
.
Note that it may not always be possible to use all the free space in a given
MAM implementation. Depending on the internal organization of the
memory and the software that controls it, fragmentation issues may mean
that certain attribute sizes might not be fully accommodated as the MAM
nears its maximum capacity.
These attributes provide a rolling history of the last four device servers in
which the tape has been loaded. The format of the attributes is as follows:
7
6
5
(MSB)
(MSB)
The same value as is returned in the SCSI
device server.
If the vendor identification is not available, the device server will
return ASCII spaces (20h).
A vendor-assigned serial number. If the product serial number is not available,
the device server will return ASCII spaces (20h).
The total number of data bytes that are transferred to or from the tape surface
(after any data compression has been applied) over the entire tape life. These
figures are cumulative and will never be reset.
These are similar to the attributes above but apply to the current load (if the tape is
currently loaded) or the last load (if the tape is currently unloaded). The device
server should reset these attributes to zero when the tape is loaded.
"Medium Common Attributes" on
4
3
Vendor Identification
Product Serial Number
INQUIRY
2
1
0
(LSB)
(LSB)
command by the
Commands 105

Advertisement

Table of Contents
loading

Table of Contents