Rs-232C/Rs-485 Set Setting; Rs-232C Selection - Sanyo DSR-3000 Instruction Manual

RS-232C/RS-485 SET SETTING

Main menu 2
<MAIN MENU 2>
1.DISPLAY/VIDEO LOSS SET ->
2.RS-232C/RS-485 SET ->
3.BUZZER SET ->
4.SECURITY LOCK SET ->
5.NETWORK SET ->
6.HDD SET ->
7.POWER FAILURE/USED TIME ->
TO MAIN MENU 1 ->
MOVE LINES WITH JOG. SELECT WITH SHUTTLE
RS-232C/RS-485 SET setting
Settings related to RS-232C and RS-485 serial communication.
1
Press the MENU button twice to display the MAIN MENU 2
screen.
The cursor moves to DISPLAY/VIDEO LOSS SET.
MENU
2
Use the jog dial to move the cursor to the RS-232C/RS-485
SET settings, and then turn the shuttle dial clockwise.
The RS-232C/RS-485 SET sub-menu appears, and the cursor
moves to CONTROL.
3
Turn the shuttle dial clockwise.
"RS-232C" flashes. Use the jog dial to select either RS-232C or
RS-485.
Sub-menus
<RS-232C/RS-485 SET>
CONTROL : RS-232C
DATA SPEED : 19200
STATUS INFO : ***
ALARM INFO : ***
ADDRESS : ***
<MAIN MENU 2>
1.DISPLAY/VIDEO LOSS SET ->
2.RS-232C/RS-485 SET ->
3.BUZZER SET ->
4.SECURITY LOCK SET ->
5.NETWORK SET ->
6.HDD SET ->
<RS-232C/RS-485 SET>
CONTROL : RS-232C
DATA SPEED : 19200
STATUS INFO : ***
ALARM INFO : ***
ADDRESS : ***
<RS-232C/RS-485 SET>
CONTROL : RS-232C
DATA SPEED : 19200
STATUS INFO : ***
ALARM INFO : ***
ADDRESS : ***
Selects CONTROL.
Sets communication environment.
Setting for RS-485 only
• Enables transmission of status.
• Enable transmission of alarm.
• Sets address.

RS-232C Selection

For connection of the RS-232C terminal of the unit to a computer,
please use a special RS-232C cable (sold separately). (See page 7.)
1
Turn the jog dial to select RS-232C, and then turn the shuttle
dial clockwise.
The cursor moves to DATA SPEED.
2
Turn the shuttle dial clockwise, use the jog dial to select a
communication speed (example: " 19200" ), and then turn the
shuttle dial clockwise.
This completes the setting and the cursor moves to CONTROL.
•
Communication speeds: 2400, 4800, 9600 and 19200
3
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
60
<RS-232C/RS-485 SET>
CONTROL : RS-232C
DATA SPEED : 19200
STATUS INFO : ***
ALARM INFO : ***
ADDRESS : ***
<RS-232C/RS-485 SET>
CONTROL : RS-232C
DATA SPEED : 19200
STATUS INFO : ***
ALARM INFO : ***
ADDRESS : ***
English