Omron V640-HAM11-ETN User Manual page 50

SECTION 4
Reading from/Writing to ID Tags
Example 6: Checking the Subnet Mask on the DIP Switch of Amplifier Unit
Command
Command code
1 4
Response
The response code (00: normal) and subnet mask (decimal, four octets of 3 digits each) are returned.
Response code
0 0
* The subnet mask is always 255.255.255.0 regardless of whether the DIP switch network settings are enabled or disabled.
Example 7: Checking IP Address in ROM
Command
Command code
1 4
Response
The response code (00: normal) and IP address in ROM (decimal, four octets of 3 digits each) are
returned.
Response code
0 0
* The above response is for when the IP address in ROM is 192.168.1.200.
Example 8: Checking the Subnet Mask in ROM
Command
Command code
1 4
Response
The response code (00: normal) and subnet mask (decimal, four octets of 3 digits each) are returned.
Response code
0 0
* The above response is for when the subnet mask in ROM is 255.255.255.0.
CIDRW System
48
User's Manual
Parameter
CR
type
1 2 0Dh
Subnet mask on DIP switch
2 5 5 2 5
Second octet
First octet
Parameter
CR
type
1 3 0Dh
IP address on DIP switch
1 9 2 1 6
Second octet
First octet
Parameter
CR
type
1 4 0Dh
IP address on DIP switch
2 5 5 2 5
First octet Second octet
5 2 5 5 0
Third octet Fourth octet
8 0 0 1 2
Third octet Fourth octet
5 2 5 5 0
Fourth octet
Third octet
CR
0 0 0Dh
CR
0 0 0Dh
CR
0 0 0Dh