Applicable Standards - Omron V640-HAM11-ETN User Manual

INTRODUCTION

Applicable Standards

The CIDRW System complies with the following international regulations and standards.
1. USA
FCC Part 15 Subpart C
FCC ID: E4EV640HAM11
FCC Part 15 Subpart C
FCC ID: E4EV640HAM11L
FCC NOTICE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired opera-
tion.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Do not remove the ferrite core (TDK-EPC Type ZCAT2749-0430C:V640-HS62) installed on the cables to suppress RF
interference.
FCC Part15 subpart B
NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
CAUTION
This device must be professionally installed.
CIDRW System
4
User's Manual
Amplifier Unit CIDRW Head
V640-HAM11-ETN V640-HS61
V640-HAM11-L-ETN V640-HS62