Omron V640-HAM11-ETN User Manual page 58

SECTION 5
Browser Interface
Browser Operation Windows
To operate an Amplifier Unit from a browser, connect the Ethernet cables, start a browser on the computer,
and specify the IP address of the Amplifier Unit as the URL. The Browser Window will be displayed. The
Status Window will be displayed first. (If a Web password is set, the Status Window will be displayed after the
Password Entry Window.) Menu buttons to move to the other windows are provided at the top of the window.
Click a menu button to move to another window.
Precautions
• Before starting the Browser Window, make sure that Java Runtime Environment (JRE) 5.0 or higher is
installed on the computer.
Java software can be downloaded from the following URL: http://www.java.com/ja/.
(Java and all trademarks and logos related to Java are trademarks or registered trademarks of Sun
Microsystems, Inc., in the USA and other countries.)
• Before starting the Browser Window, make sure that the Amplifier Unit is not executing a command from
terminal software or another source. The Amplifier Unit must be in idling status. If the Browser Window is
started while the Amplifier Unit is executing a command, responses will not be returned for the commands
sent from the terminal software or Browser Window.
• Access is possible from only one browser at a time. If the Amplifier Unit is accessed from another browser
(B) while it is connected to a browser (A), the control right will move to browser B.
Before you begin the Browser Interface
1.
Connect the PC to the Amplifier Unit through the LAN cable.
2.
Turn on of the Amplifier Unit.
3.
Start the browser (ex.Internet Explorer).
4.
Input the IP Address of the Amplifier Unit in the URL column.
5.
The Amplifier Unit browser screen will be displayed.
CIDRW System
56
User's Manual