Test - Omron V640-HAM11-ETN User Manual

SECTION 4
Reading from/Writing to ID Tags

■ TEST

Performs a communications test on communications between the host device and Amplifier Unit.
When an Amplifier Unit receives a test command, it sends the response code and command test data
to the host device as the response.
Command
Command code
1 0
* Number of data n < 136 (2-character units)
Parameter Description
Parameter
Test data
Response
The response code (when normal: 00) and the received test data are returned.
Response
code
0 0
Example: Performing a Test for the Amplifier Unit Using the Data 12345678
Command
Command code
1 0
Response
Response
code
0 0
CIDRW System
44
User's Manual
Test data
Data 1 •••
The data to be sent in the test is specified with a hexadecimal value. (270 characters max.)
However, note that odd numbers of characters cannot be used.
Test data
Data 1 •••
Test data
Data 1 Data 2
1 2 3 4
Test data
Data 1 Data 2
1 2 3 4
CR
Data n
0Dh
Description
CR
Data n
0Dh
Data 3 Data 4
5 6 7 8
CR
Data 3 Data 4
5 6 7 8 0Dh
CR
0Dh