Recommended Battery For Use With The Ups; Dry I/O Contacts; Usb Communication Port - Allen-Bradley Bulletin 1609 User Manual

Recommended Battery
for Use with the UPS
and 1609-EXBAT

Dry I/O Contacts

USB Communication Port

General Information 1609-D
and 1609-B UPS Units
Rockwell Automation battery catalog numbers 1609-SBAT and 1609-HBAT
consist of the battery manufacturers listed below:
Manufacturer
B & B Battery (USA)
GS Yuasa International Ltd.
Shenzhen Center Power Tech Co., Ltd.
Shenzhen Ritar Power Co., Ltd.
CSB Battery Co., Ltd.
Not for use in a computer room as defined in the Standard for the Protection
of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
Dispose of used batteries according to the battery instructions.
There is one Remote Enable/Disable Switch connection and 3 Dry I/O Contacts
available on the front of the UPS. Do not apply external power to the Remote
Enable/Disable Switch; however, the 3 sets of Dry Contacts require external
power supplies (Contacts Rating is 1A/24V DC). Each of the dry contacts is
used to provide a remote status indication of the UPS, as follows:
8 7 6 5 4 3 2 1
The UPS supports a USB communication port for the end user
to connect with a computer. The user may monitor all the UPS
status through the USB port if the 1609 UPS Management
Software is installed in the computer. The software is stored
in the CD and can be found in the accessory bag.
Rockwell Automation Publication 1609-UM009A-EN-P - January 2013
MH Number Type
MH19884 HRLS 5.5-12
BP 5-12
HR 5.5-12
SHR7-12
MH12970 NPH5-12
MH25860 CP1250
MH28539 RT1250
MH14533 HR1221W
•1 and 2 On Battery Contact (NO)
•3 and 4 Low Battery Contact (NO)
•5 and 6 Fault (Indicates UPS has faulted see trouble shooting section)
•7 and 8 Remote On/O (Shorted (closed) for ON, Open for OFF)
Bulletin 1609 UPS
Rating
12V DC, 2.75 Ah
12V DC, 5.0 Ah
12V DC, 2.75 Ah
12V DC, 3.375 Ah
12V DC, 5.0 Ah
12V DC, 5.0 Ah
12V DC, 5.0 Ah
12V DC, 5.25 Ah
19