Bulletin 1609 UPS
Connect Power and
Equipment to the UPS
1609-B Block Figure
14
WARNING: This UPS features Surge Protective Device (SPD) located on the top
of the unit. Please disconnect all power sources before servicing due to Electric
Shock Hazard for risk of severe injury or death.
1. Connect the appropriate input power to the UPS's input (Line, Neutral
and Ground) terminals (see Figure 5).
2. Connect the specified equipment to the UPS's output (Line, Neutral and
Ground) terminals (see Figure 5).
Figure 5 - System Wiring
AC Input
Input
Filter
L
AC
Input
E
N
AC to DC (Charger)
Rockwell Automation Publication 1609-UM009A-EN-P - January 2013
INPUT
OUTPUT
L
N
G
L
N
G
AC Output
Backfeed
Relay
Backfeed
Relay
+
-
DC to DC
DC to AC (Step Wave)
L
AC
E
Output
N
Inverter
Relay