Connecting Equipment And Power To The Ups - Allen-Bradley 1609-P3000N User Manual

Connecting Equipment and Power to the UPS

1. Connect equipment to the UPS.
Avoid using extension cords.
2. Turn on all connected equipment. To use the UPS as a master ON/OFF switch, ensure all
connected equipment is switched ON. The equipment will not be powered until the UPS is
turned on.
3. To power up the UPS press the
• The UPS battery charges when it is connected to utility power. The battery charges to 90%
capacity during the first three hours of normal operation. Do not expect full battery run
capability during this initial charge period.
5. For additional computer system security, install PowerChute
monitoring software.
O
PTIONS
q
External Battery Pack (1609-PXBP)
q
Rail Installation Kit (1609-PRK1)
q
Isolation Transformer (1609-5000CCT)
button on the front panel.
6
®
Business Edition Smart-UPS