Connect Power And Equipment To The Ups; Bul. 1609-D Block Figure - Allen-Bradley Bulletin 1609 User Manual

Bulletin 1609 UPS
Connect Power and
Equipment to the UPS
1609-D Block Figure
10
WARNING: This UPS features Surge Protection Device (SPD) is located
on the left front of the unit. Disconnect all power sources before servicing
due to Electric Shock Hazard for risk of severe injury or death.
1. Connect the appropriate input power to the UPS's input (Line, Neutral
and Ground) terminals (see Figure 2).
2. Connect the specified equipment to the UPS's output (Line, Neutral and
Ground) terminals (see Figure 2).
Figure 2 - System Wiring
3. Connect any additional optional accessories (1609-ENET card).
Input
Breaker
Filter
L
AC
E
Input
N
Rockwell Automation Publication 1609-UM009A-EN-P - January 2013
Backfeed
AVR
Relay
Backfeed
Relay
AC to AC
+
-
AC to DC DC to DC DC to AC
L
AC
E
Output
N
Inverter
Relay