Skipping Program Cycles; Program Sequence - Miele PW 6101 Operating Instructions Manual

Use

Skipping program cycles

Cycles of a program in progress can be
skipped or repeated.
^ Press the f "End" button to stop the
program.
1 Hot Wash
Program stop
ü
i
^ Press the ü "Skip" button. The display
shows the current area, block or step.
See also "Program structure" in the
Programming manual .
Skip -> 1 Hot Wash
Program stop
Area 2: Main wash
Area: 2 Main wash
Block 1: Main wash
Step: Wash time 2
^ Turn the jog shuttle to "Area" and press it to
confirm the selection.
Area: Select either 1 Prewash, 2 Main
wash or 3 Rinse and confirm by pressing
the jog shuttle.
^ Turn the jog shuttle to "Block" and press it
to confirm the selection.
Block: Select either Prewash 1-10, Main
wash 1-10 or Rinse 1-10 and confirm by
pressing the jog shuttle.
^ Turn the jog shuttle to "Block" and press it
to confirm the selection. Select the desired
program step and confirm.
^ To start the new program step press S
"Save" and h "Start".
To go back without skipping a program
cycle
^ Press the A "Back" to go back to the
program stop.
18

Program sequence

The program sequence is shown in the
display after the start of the program.
1
104 °F
+i
The second display line, here Pre-wash, the
f
wash water temperature is shown.
1
194 °F
+i
If the program block Pre-wash has ended,
the 2nd line in the display shows the
program block Main wash with the current
e
wash water temperature. The 3rd line shows
A
S
the following program block, here Rinse 1.
The program end display, above 12:35,
shows the time of day when the program will
- be finished.
A
S
Hot Wash
Pre-wash
Main wash
m k
m
Hot Wash
Main wash
Rinse 1 Cold
m k
m
68 °F
End at 12:35
K f
140 °F
End at 12:35
K f