The spin speed can be adjusted from 0 -
300 then in 25 rpm increments. Depending
on the model of machine and the Program
selected the max. spin speed ranges from
600 - 1200 rpms.
^ Turn the jog shuttle to "Spin speed"
and press to confirm the selection.
^ Turn the jog shuttle to the desired spin
speed and press to confirm the selection.
8. Start the program
^ Press the h "Start" button to start the
9. End of program
At the end of the program, once the drum is
stationary and no water is in the machine the
display shows (for example):
Door can be opened.
At the same time a tone will sound for a
short time to signal the program end.
^ Pull the door handle to open the drum
If the door cannot be opened, press
against the door handle then pull again.
Do not use force!
^ Remove the laundry.
^ Leave the drum door open to air dry the
^ Turn the machine off with the 0 "Off" button.
^ Turn the mains off (on-site).
^ Close the gas or steam valve (on-site).