Table of Contents
Advertisement
3. Starting the calibration
program
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Normal program must
be run without laundry and without
detergent.
Turn on the faucet.
Turn the program selector to the
Normal position.
The washing machine is now switched
on and the temperature Warm+ and
spin speed Max light up.
Touch the Start/Add laundry sensor
button.
The wash program will start.
After 15 minutes, the indicators dim.
Before using for the first time
Opening the door at the end of the
program
The door remains locked during the
Anti-crease phase. The control field
lights up for the first 10 minutes. The
control field then goes out and
the Start/Add laundry sensor button
flashes.
Turn the program selector to the
position.
appears on the time display and the
indicator light goes out.
The door will be unlocked.
Tip: After the Anti-crease phase, the
washing machine will have switched off
and the door unlocked automatically.
The control field is completely dark.
Take hold of the door and pull it
open.
Tip: Leave the door slightly open to
allow the drum to dry.
The appliance is now ready for use.
17
Advertisement
Table of Contents
