Skipping Program Cycles; Program Cancellation - Miele WS 5240 Operating Instructions Manual

Washer-extractor
Hide thumbs Also See for WS 5240:
Table of Contents

Advertisement

Skipping program cycles

Cycles of a program in progress can be
skipped or repeated.
^ Press 7 "End" and the program is
stopped.
PROGRAMME
Main wash
PROGRAMME STOP
PROGRAMME STOP flashes in the display.
^ Use the 1 or 2 "Cursor" to skip ahead or
move back to a cycle in the program.
^ At the position required press X "Start" to
continue the program again.
2
COTTONS

Program cancellation

^ To cancel a program, press 7 "End" twice
in succession.
If the program was cancelled while there
was water in the machine, or during a spin,
the following may appear in the display (ex-
ample):
PROGRAMME
PROGRAMME END
DOOR IS LOCKED
WATER IS IN THE MACHINE
or:
PROGRAMME
PROGRAMME END
DOOR IS LOCKED
DRUM IS NOT YET STATIONARY
^ Run the Separate Drain or Separate Spin
program. On completion the door can be
opened.
Rinsing with hot water
Standard programs
1 Cottons 200 °F (95°C) and
2 Cottons 140 °F (60°C)
are programmed to rinse with hot water.
If a hot water supply is available it is an ad-
vantage to run the final rinse with hot water.
This reduces the residual moisture content of
the laundry after spinning.
If the laundry is dried or ironed immediately
after washing, drying times will be shortened
and ironing easier.
Notes
2
COTTONS
2
COTTONS
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ws 5320

Table of Contents