Miele PW 6101 Operating Instructions Manual page 33

Water intake fault
M
Call the Miele Service Department.
if restart is without success.
i
^ Check the water supply and press h
"Start".
Heating system fault
§
Program Stop
Press Start.
i
^ Press h "Start" to continue the program
without heating.
If the program has a "Thermostop" the
program will time out.
^ Call Miele Technical Service.
^ Some programs may be canceled if this
messages shows.
Call Technical Service.
Motor system error
m
Program stop. Press Start.
Motor temperature too high.
i
^ Allow the motor to cool.
Imbalance fault
§
Call the Miele Service Department
if restart is without success.
i
Large imbalance, the imbalance switch has
activated.
^ Turn the machine off and on again
^ Press h "Start".
Frequently asked questions
Drain error
q
Call the Miele Service Department
if restart is without success.
f i
^ Check and clean the drain system and
press h "Start".
A defective drain valve should only be
replaced by an authorized service
technician.
Dispensing system fault
f
ö
Fill dispensing container 1
Press Start.
i
^ Change/fill the dispensing container.
Card error
§
Reinsert card correctly in card reader.
Continue: Press Start.
i
^ Insert the card properly into the card
reader.
f
A
f
f
f
33