Machine connections: Electrical 1. Standard voltage (standard version) 3N AC 380 - 415 connection Frequency 50 - 60 Connected load Fuse rating 3 × 16 Connection cable, min. gauge mm² 5 × 1.5 Connection cable not supplied (to be ordered separately) Variations in the following countries: 1.
Steam Steam pressure 600 - 1000 connection Indirect Boiling point °C 152 - 184 Mass flow (max. delivery) kg/h Heater rating On-site threaded union Inch ½" female thread Steam valve, filter, non-return valve and steam shut-off valve must be provided on site. Steam valve supply lead length The supply lead for the electric steam valve is included.
On-site drain connection (int. diameter) 75 [DN 70 connection] Max. transient flow rate l/min Vented collector line required; if insufficient venting, use Miele installation kit, Mat. no. 05238090. When several machines are connected, ensure that the manifold is of a sufficient diameter. Securing of...
Machine data Machine width Machine depth 1130 Machine height 1400 Machine width Casing depth 1020 Min. access width Recommended distance from opposite wall (to front of 1450 machine) Min. wall gap (to rear edge of lid) Net weight Max. floor load in operation 6076 Max.