Mounting; Figure 2-1. Kt/10254 Mounting Panel Kit (For Horizontal Or Vertical Mounting) - Comtech EF Data CRS-170A Installation And Operation Manual

CRS-170A L-Band 1:1 Redundancy Switch
Installation
2.2

Mounting

Figure 2-1. KT/10254 Mounting Panel Kit (for horizontal or vertical mounting)

The CRS‐170A is designed to be freestanding, or mounted in the rear of the rack containing the
modems using the available Comtech EF Data Mounting Panel Kit KT/10254.
As shown in Figure 2‐1, this kit allows the module to be mounted horizontally or vertically in the
rack. In applications with the CDM‐600L (CLM‐9600L) and the CRS‐150, the CRS‐170A is best
mounted horizontally above or below the CRS‐150.
Otherwise, because of the module's small size and weight, the user may choose to let the
module hang freely, supported by the interfacing cables.
2–2
Revision 9
MN/CRS170A.IOM