Cabling To The Cdm-750; Modem-To-Switch Control And If Interface Connection - Comtech EF Data CRS-170A Installation And Operation Manual

CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
4.3.4.3

Cabling to the CDM-750

1. For information on the CDM‐750's 1:1 auto‐enable functionality, see:
2. For information on the cables and cable assemblies specified in this section, see:
4.3.5

Modem-to-Switch Control and IF Interface Connection

Terrestrial data interface components/kits must be ordered separately. See Sect.
4.3.2 for CDM‐750 terrestrial data interface configuration and connection examples
and details.
Figure 4‐20 shows the control and IF connections for the CDM‐750 to the CRS‐170A Switch. All
control and IF components are provided for the CDM‐750 in the KT‐0000160 CRS‐170A L‐Band 1:1
Redundancy Kit.
•
Chapter 3. MODEM AND SWITCH CONFIGURATION
•
CDM‐750 Advanced High‐Speed Trunking Modem Installation and
Operation Manual (CEFD P/N MN‐CDM750)
•
Appendix A. CABLE DRAWINGS
4–23
Revision 9
MN/CRS170A.IOM