Mounting - Comtech EF Data CRS-170A Installation And Operation Manual
L-band 1:1 redundancy switch accessory product for use only with comtech ef data cdm-625/a, cdm-840, cdm-750, cdm-760, cdm-570l, cdm-700, cdm-710, cdm-710g, cdm-600l (clm-9600l), and sdm-300l3 modems
Hide thumbs
Also See for CRS-170A:
- Installation and operation manual (154 pages) ,
- Installation and operation manual (176 pages)
Table of Contents
Advertisement
CRS-170A L-Band 1:1 Redundancy Switch
Installation
2.2
Mounting
Figure 2-1. KT/10254 Mounting Panel Kit (for horizontal or vertical mounting)
The CRS-170A is designed to be freestanding, or mounted in the rear of the rack containing the
modems using the available Comtech EF Data Mounting Panel Kit KT/10254.
As shown in Figure 2-1, this kit allows the module to be mounted horizontally or vertically in the
rack. In applications with the CDM-600L (CLM-9600L) and the CRS-150, the CRS-170A is best
mounted horizontally above or below the CRS-150.
Otherwise, because of the module's small size and weight, you may choose to let the module
hang freely, supported by the interfacing cables.
2–2
Revision 10
MN/CRS170A.IOM
Advertisement
Table of Contents
