Southbend S-36 Owner's Manual page 17

B. 3230AW Mounted to Wall
1. Each 3230AW will be mounted to the wall with one of the following kits:
EACH BLACK KIT INCLUDES- (Kit. No 4440035)
Qty. Part No.
l 1073106
l 1073105
l 1073104
l 1073107
2 1073100
6
11 1146341
11 1146410
11 1146501
8 1146300
1 1163558
2 1163560
1 1173329
1 1173337
EACH STAINLESS STEEL KIT INCLUDES: (Kit No. 4440036)
Qty. Part No.
1 1073103
1 1073108
1 1073102
1 1073101
SAME MOUNTING BRACKETS AS ABOVE
SAME SCREWS AS ABOVE
1 1166917
1 1173329
1 1173337
FASTENER CODE
S-1 ¼ -20
S #10 Sheet Metal Screw
N-B 10-24
(Drill 3/16" hole for N-B - 5/32" hole for S - 7/32" hole for S-1)
2. Attach right and left mounting brackets (1) to unit with three ¼ -20 self-tapping screws (S-1) each (see
Fig. 2). The six holes for the mounting brackets must be drilled in the unit. Use a 7/32" dia. drill bit.
3. Attach wall plate (2) to false back (3) with five 10-24 machine screws, lockwashers and nuts (N-B).
Attach wall plate (2) so that top row of holes is above top of false back (3). The five holes in the false
back (3) which the wall plate (2) attach to must be drilled. Use a 3/16" dia. drill bit.
4. Attach false back (3) to right and left mounting brackets (1) with six #10 sheet metal screws (S). The holes
must be drilled in the mounting brackets. Use a 5/32" dia. drill bit.
5. Lay unit carefully on the false back. Take off bottom of unit by removing the six sheet metal screws which
secure it. Set the bottom aside; it will not be used again.
6. Attach two bottom supports (4), and false back (3), to unit with three 10-24 screws, lock-washers and nut
(N-B) each. The six holes must be drilled in the bottom of the unit (4 holes) and false back (2 holes). Use
a 3/16" dia. drill bit.
7. Attach entire unit and assembly to wall with appropriate screws (furnished by installer). Use the five holes
at top of wall plate (2) and the three holes each on the bottom supports (4).
Description
Right Mounting Bracket
Left Mounting Bracket
Wall Plate
False Back
Bottom Support
Self Tapping Screws – ¼ -20
Machine Screws — 10-24
Square Nuts — 10-24
Lock Washer — 3/16
Sheet Metal Screws - #10 x ½
Bottom Cover
Bottom Bracket
Air Wash Baffle
Air Wash Stiffener
Description
Wall Plate
False Back
Right Bottom Support
Left Bottom Support
Flue Diverter
Air Wash Baffle
Air Wash Stiffener
Self-Tapping Screw
Nut, Lock Washer, Machine Screw
INSTALLATION
Item No.
(1)
(1)
(2) Fig. 2
(3)
(4)
(1) Fig. 3
(2)
(6)
(7)
Item No.
(2)
(3) Fig. 2
(4)
(4)
(5)
(6)
(7)
SALAMANDER RADIANT BROILER
SECTION ONE — INSTALLATION
PAGE 5