Download Print this page

Southbend MRA-32 Owner's Manual

Compact infra-red broiler
Hide thumbs Also See for MRA-32:

Advertisement

Quick Links

m
southbend
A MiDDlEBY COMPANY
IMPORTANT
FOR FUTURE REFERENCE
Please complete this informa-
tion and retain this manual for
the life of the equipment.
MODEL #
SERIAL #
DATE PURCHASED
I
OWNER'S MANUAL
INSTALLATION
USER'S GUIDE
SERVICE
PARTS
COMPACT
INFRA-RED BROILER
MODELS: MRA=32C, MRA-32, MRA-32W
MRA-36, MRA-60
These instructions should be read thoroughly before attempting installation. Set up,
installation and Performance Check should be performed by a qualified service
technician. The Manufacturer, Southbend (1100 Old Honeycutt Rd., Fuquay-Varina,
North Carolina 2X26), informs you that unless the installation instructions for the above
described Southbend product are followed and performed by a qualified service
technician, (a person experienced in and knowledgeable concerning the instaflation
of commercial gas and/or electrical cooking equipment) then the terms and conditions
of the Manufacturer's Limited Warranty will be rendered void and no warranty of any
kind shall apply.
If the equipment has been changed, altered, modified or repaired by other than a
qualified service technician during or after the 12-month limited warranty period, then
the manufacturer shall not be liable for any incidental or consequential damages to
any person or to any property which may result from the use of the equipment thereafter.
Some States do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion thereto may not apply to you.
In the event you have any question concerning the installation, use, care, or service
of the product, write Customer Service Department, Southbend, 1100 Old Honeycutt
Rd., Fuquay-Varina, North Carolina 27526.
6.00
COMPACT INFRA-RED BROILER
(Manual
Section
BR)

Advertisement

loading

Summary of Contents for Southbend MRA-32

  • Page 1 The Manufacturer, Southbend (1100 Old Honeycutt Rd., Fuquay-Varina, North Carolina 2X26), informs you that unless the installation instructions for the above described Southbend product are followed and performed by a qualified service technician, (a person experienced in and knowledgeable concerning the instaflation of commercial gas and/or electrical cooking equipment) then the terms and conditions of the Manufacturer’s Limited Warranty will be rendered void and no warranty of any...
  • Page 2 Congratulations! You have just purchased one of the finest pieces of heavy-duty, commercial cooking equipment on the market today. You will find that your new equipment, like all Southbend equipment, has been designed and manufactured to some of the toughest standards in the industry - those of Southbend Corporation.
  • Page 3 MRA-32C Complete untt Consists of (1) MR.L30 Leg Kit MRA-32W 32 ” Complete Unit Consists of (1) MR.W-30 Wall Mount Kit MRA-30 Basic Untr MRA-32 32” Complete Umt Consists of (1) MR-S-32 Riser (1) MRA-30 Basic Umt MRA.36 36’h ‘I Complete Untt Consists of (1) MR.C36 Riser...
  • Page 4 3 @ 10,666 BTU/Hi-. Minimum clearances from combustible MRA-32, MRA-36, MRA-60 NOTE: For Model Nos. MRA-32C side, since it is necessary on all models to remove the body side to gain access to the regulator 118 NPT pressure test tap.
  • Page 5 IS MOVED TO ITS ORIGINALLY GAS CONNECTION: All MRA- Series broilers are factory equipped with a pressure regulator which is set for the type of gas denoted on the serial plate. If applicable, the vent line from the gas appliance pressure regulator outdoors in accordance with local codes or, in the absence of local codes, with the National Gas Code, ANSI Z223.1-Latest...
  • Page 6 1. Installing legs for counter units. ModelNo.MRA-32C Assembling wall mount and attaching ModelNo.MRA-32C 3. Assembling flue riser and attaching ModelNo.MRA-32...,... Assembling flue riser and attaching ModelNo.MRA-36... 5. Assembling flue riser and attaching Model No. MRA-60...._ . _ . . , . . . _ _ ... . .
  • Page 7 INSTALLATION MODEL NO. MRA-32W DIAGRAM ASSEMBLING WALL MOUNT BRACKET WALL MOUNT ASSEMBLY MRW-30 1. Install wall mount to wall using (6) sheet metal screws and (6) washers provided. Make sure screws hit wall studs. Insure wall mount is adequately secured to wall to support weight of broiler lbs.).
  • Page 8 INSTALLATION Fasten broiler hook “A” provided. Prepare gas supply connection Section Lift broiler “B” with broiler and fasten with (31 slotted hex head sheet metal screws provided. Fasten bottom of broiler “B” to wall mount with (2) slotted hex head sheet metal screws provided lone each side).
  • Page 9 No. 1. U-shaped channel “G” is provided for all batteried angles on adjacent ranges to form a sanitary INSTALLATION MODEL NO. MRA-32 FOR MOUNTING 32” RISER TO RANGE studs “C” to enter holes in riser bracket “B.” Secure riser removed in instruction No.
  • Page 10 B. Position bottom cover “C” above flanges, as shoun in View “Z-Z” and reinstall COMPACT INFRA-RED BROILER SECTION ONE - INSTALLATION PAGE 8 MODEL NO. MRA-32 DIAGRAM FOR MOUNTING BROILER RANGE RISER with Bottom Cover Installed to rear of broiler “B”...
  • Page 11 DIAGRAM MRC-36 CAFE 36” RISER Front panel “A” is fastened with (4) hex head sheet metal screws. Remove screws and panel. Lower riser onto range, line up holes in riser bracket “B” with weld nut holes in range. Secure riser bracket “B” to range with (4) hex head I’ ,,-20 screws and 14) washers (2 each side) provided. The oven flue riser extension “C”...
  • Page 12 INSTALLATION TO 36” CAFE RANGE RISER NO. MRC-36 1. Fasten broiler hook “A” provided. 2. Prepare gas supply connection Section 1.1 3. Lift broiler “B” with broiler hook “A” installed. and fasten with (31 slotted hex head sheet metal screws provided. Fasten bottom of broiler each side).
  • Page 13 DIAGRAMFORMOUNTINGBROILER 60%" CAFE RANGE RISERNO.MRK-30 NOTE: Most 603/” riser and broiler assemblies are shipped from the factory range. If not, however, follow the mounting tions should then be followed to mount a broiler to an MRK-30, 603h” riser assembly. 1. Determine method of gas piping before mounting Section 1.1 Lift broiler “A”...
  • Page 14 Southbend, a Middleby Co., warrants that the Southbend chasers, is free from defects in materials a result of normal use within the period and limits defined below, then at the option of Southbend such parts will be repaired or replaced by Southbend...
  • Page 15 ......in only 20-25 seconds It is important that the rack drip pan be used at all times. Without past the burners, reducing temperature COMPACT INFRA-RED BROILERS SECTION TWO - USER’S GUIDE PAGE 2 WARNING: EQUIPPED...
  • Page 16 BRUSH, STEEL STEEL TOOLS. to clean. may then be required. Heat tint can normally scouring pads, or a STAIN- or soap with a dry cloth. COMPACT INFRA-RED BROILERS SECTION TWO - USER’S GUIDE PAGE 3...
  • Page 17 COMPACT INFRA-RED BROILERS ADJUSTMENTS SERVICE QUALIFIED TECHNICIAN WHO IS EXPERIENCED WITH OPERATION HOWEVER, TO ASSURE YOUR SERVICE AGENCY RELIABLE OTHER ASSISTANCES, AND FOR GENUINE All units are adjusted at the factory. In case of problems in operation at initial type of gas and manifold pressure and compare with information under the broiler grease drawer at the front towards the left.
  • Page 18 4. After turning on gas supply, check gas connection the repair, with soapy water to be positive 5. Reinstall bottom cover with (41 screws. COMPACT INFRA-RED BROILERS SECTION THREE - SERVICE PAGE 2 PARTS: the body side and/or front. The following forward and removed.
  • Page 19 HAVE YOUR SOUTHBEND AUTHORIZED UNIT FOR MAXIMUM SERVICE PERFORMANCE. COMPACT INFRA-RED BROILERS SECTION THREE - SERVICE PAGE 3...
  • Page 20 Service Agency. When ordering parts please supply the Model Number, Serial Number, Part Xumber, Description, plus Finish, Type of Gas and Electrical For parts not listed consult a Southbend Authorized Parts Distributor Agency. If necessary, please consult Southbend Parts Department SUFFIX...
  • Page 21 PARTS COMPACTBROILERS PARTS LIST 1077400 / REAR DRIP SHIELD 1073498 -- - - PILO- '-.-." I 1079167 i 1079168 j PlLOi un~tu - PROW 4440011 SHOULDERBOLTASM. I.~____, 1075001 LT BURNER REST 1075099 FIT r--- 1076799 Hi-Lb VALVt P5239-3 PIPE UNION __- ..-.
  • Page 22 COMPACTBROILERSPARTSLIST MRK300 BLACK RlSERAY8.4. MRK3C-7 S.S. RISER ASM. 1075700 CAFtlDN 1161331 RACK DRIP PAN ASM. INSTRUCTlON MANUAL-(One copy furmshed free. 1163933 Extra copies are available thru your parts/service distributor at addlbonal cost. 11111 COMPACT INFRA-RED SECTION FOUR - PARTS BROILER PAGE 3...
  • Page 23 %” x 1%” TUBING MANIFOLD TUBE ’ COMPACT INFRA-RED BROILER SECTION FOUR - PARTS PAGE 4 METAL TOP MOUNTING DUAL PILOT ADJ. ‘h” x ‘/i” CC BOmOM BRACKE PRESSURE REG. 1133301 NATURAL 1165704 PROPANE Lnho I” U S A Rev 7.91...
  • Page 24 INFRA-RED BROILER A product with the Southbend name incorporates the best in durability and low maintenance. We all recognize however, that replacement parts and occasional professional service may be necessary to extend the useful life of this unit. When service is needed, contact a Southbend Authorized Service Agency, or your dealer.

This manual is also suitable for:

Mra-32cMra-32wMra-60Mra-36