Table of Contents
Advertisement
Quick Links
~
southbend
A MIDDLEBY COMPANY
IMPORTANT
FOR FUTURE REFERENCE
Please complete this informa-
tion and retain this manual for
the life of the equipment.
MODEL #
SERIAL #
DATE PURCHASED
OWNER'S MANUAL
INSTALLATION
USER'S GUIDE
SERVICE
PARTS
SALAMANDER
RADIANT BROILER
MODELS:
S-36, S-36A, S-60, S-6OA, 3230,323OA
S-36W, S-36AW, 323OW, 3230AW
These instructions should be read thoroughly before attempting installation. Installation
and Start Up should be performed by a qualified service technician. The Manufacturer,
Southbend
(Head Office: 1100 Old Honeycutt Rd., Fuquay, North Carolina 27526)
informs you that unless the installation instructions for the above described Southbend
product are followed
and performed by a qualified
service technician,
(a person
experienced
in and knowledgeable
concerning
the installation
of commercial gas
and/or
electrical
cooking
equipment)
then the terms
and conditions
of the
Manufacturer's
Limited Warranty will be rendered void and no warranty of any kind
shall apply.
If the equipment
has been changed, altered, modified or repaired by other than a
qualified service technician during or after the 12-month limited warranty period, then
the manufacturer shall not be liable for any incidental or consequential
damages to any
person or to any property which may result from the use of the equipment thereafter.
Some States do not allow the exclusion
or limitation of incidental
or consequential
damages, so the above limitation or exclusion thereto may not apply to you.
In the event you have any questions concerning the installation, use, care, or service of
the product, write Customer Service Department, Southbend, 1100 Old Honeycutt Rd.,
Fuquay, North Carolina 27526.
WARNING:
Improper
installation,
adjustment,
alteration,
service
or maintenance
can cause property
damage,
injury
or death.
Read the installation,
operating
and maintenance
instructions
thoroughly
before installing
or servicing
this equipment.
1
I
$4.00
SALAMANDER
RADIANT BROILER
(Manual Section BR)
Advertisement
Table of Contents
Related Manuals for Southbend 3230
Summary of Contents for Southbend 3230
- Page 1 Start Up should be performed by a qualified service technician. The Manufacturer, Southbend (Head Office: 1100 Old Honeycutt Rd., Fuquay, North Carolina 27526) informs you that unless the installation instructions for the above described Southbend product are followed experienced...
- Page 2 SUPPLIER FOR SERVICE. southbend bfmms~ycohfpANy like all Southbend equipment, - those of Southbend. Each piece of engineered and designs have been verified in some of the more strenuous commercial cooking applications. you will experience years of reliable, trouble-free To get the best results, it’s important CAUTION USE ONLY.
-
Page 3: Section One - Installatlon
SALAMANDER NOTE: If this equipment is being installed contact Southbend Service Department. TOP VIEW S-36A S-66A MODELS S-36A for 36?h” Range S-60A for 60%” Range TOP VIEW MODEL Width 3230A 23” S-36A (36% ” Range) 23” S80A 60%” Range) MANIFOLD... -
Page 4: Installation
These models are for operation on natural The appliance should be connected ONLY to the type of gas for which it is equipped. All Southbend equipment is adjusted at the factory, however, burner air shutters and pilot heights should be checked at installation and adjusted if necessary. - Page 5 PLEASE NOTE C LEARANCES Minimum clearances from COMBUSTIBLE TYPE ALL MODELS WALL MOUNTED UNITS The Minimum clearances from NON-COMBUSTIBLE TYPE ALL MODELS WALL MOUNTED UNITS NOTE: No additional clearance from the sides and rear is required serviceable from the front. THESE PROCEDURES MUST...
- Page 6 INSTALLATION 5. Replace panel “A,” 6. Locate rear stiffeners 1162340 for 36” deep units. The stiffeners have 10 pre-punched holes each. 7. Hold stiffeners against the rear of the unit with their outside edge approximately the right and the left edges of the unit. Mark the stiffener hole locations on back of unit. 8.
- Page 7 3230AW Mounted to Wall 1. Each 3230AW will be mounted to the wall with one of the following EACH BLACK KIT INCLUDES: Part No. 1073106 1073105 1073104 1073107 1073100 1146341 1146410 1146501 1146300 1163558 1163560 1173329 1173337 EACH STAINLESS STEEL KIT INCLUDES: Part No.
- Page 8 INSTALLATION 8. Attach the two bottom brackets (2) (see Fig. 3) to the bottom of the unit, at the rear, with two of the existing 9. Hold bottom (1) in place and secure with four sheet metal screws (S), one in each bracket and two in front edge.
- Page 9 INSTALLATION S-36AW AND 3230AW SALAMANDER WALL KIT FIGURE 2 ADDITIONAL WALL MOUNT KIT PARTS FOR “A” MODEL SALAMANDERS FIGURE 3 SALAMANDER RADIANT BROILER SECTION ONE - INSTALLATION PAGE 7...
-
Page 10: Gas Connection
INSTALLATION GAS CONNECTION: On most units the 3/4” NPT pipe nipple with union will be factory installed. Steps 1 to 4 below. 1. Locate the sheet metal cover plate on the bottom right of the unit. Remove the four screws which hold it in place. -
Page 11: Limited Warranty
Should any part thereof become defective as a result of normal use within the period and limits defined below, then at the option of Southbend such parts will be repaired or replaced by Southbend or its Autho- rized Service Agency. -
Page 12: Operation
GAS DURING THE LIGHTING THE LEAKHAS REASONS, THE BROILER EACH FOR PROPER IGNITION THIS SAFETY CONSIDERATION BROILERS. SHOULD IGNITION by turning knob counterclockwise. knob to its furthest clockwise position is “OFF.” from the gas input on main burners. PROCEDURE, IMMEDIATELY BEEN CORRECTED. -
Page 13: Maintenance
POWER FROM APPLIANCE TYPE OVEN HAVING A RADIANT BEFORE CLEANIN G OR SERVICING, Southbend equipment is sturdily constructed durable service when treated with ordinary care. To expect the best performance, your equipment must be maintained in good condition and cleaned daily. Naturally, depend on the amount and degree of usage. - Page 14 MAINTENANCE BLACK BAKED ENAMEL: 1. Allow unit to cool somewhat after use and wash exterior solution; particularly CLEAN RACK: To prevent excess smoking, the racks, rack pan and the other members must be kept clean of food remnants. Use wire brush or similar scraping utensil. DO NOT USE STEEL WOOL or similar scrub pad which will leave small metal particles Rotate rack stops up out of the path of the rack.
-
Page 15: Section Three - Service
SALAMANDER ADJUSTMENTS AND SERVICE QUALIFIED TECHNICIAN KNOWLEDGEABLE WITH, COOKING EQUIPMENT. CONTACT YOUR AUTHORIZED SERVICE, DEPENDABLE GENUINE FACTORY PARTS. DISCONNECT POWER CONVECTION-TYPE OVEN HAVING BEFORE CLEANIN G OR SERVICING, APPLIANCE In case of problems in operation at initial compare with information listed on the serial plate, located on interior under grease pan. -
Page 16: Pressure Regulator
ADJUSTMENTS PRESSURE REGULATOR: Turn off main gas to unit. Remove broiler bottom (6 sheet metal screws). Remove pilot line valve from manifold. Install a fitting appropriate Be sure both valves are in the “OFF” Ignite rear burner by hand and then front burner. With burners full on, read manometer. -
Page 17: Parts List
The serial plate is located on the interior ordering parts from the Southbend Parts Distributor, Serial Number, Part Number, Description, For parts not listed consult a Southbend Authorized Service Agency. If necessary, please consult Southbend Parts Department Part No. Description 1164209 Valve... - Page 18 PARTS Part No. Description 1073495 Valve Handle Assembly (Hi-Lo) 1166894 Air Shutter Weld Assembly 1166889 Bar Burner Assembly Complete 1166281 Rack 1166887 Handle for Rack 1166886 RackPan 1166757 Mechanism Handle Assembly 1166747 Carriage Assembly Complete 1166748 Carriage Weld Assembly Only 4440006 Roller Bearing Kit(P9130 &...
- Page 19 We all recognize however, that replacement parts and occasional professional service may be necessary to extend the useful life of this unit. When service is needed, contact a Southbend Authorized Service Agency, or your dealer. To avoid confusion, of your unit.
Need help?
Do you have a question about the 3230 and is the answer not in the manual?
Questions and answers