Advertisement
Quick Links
OWNER'S MANUAL
INFRA-RED BROILER
MODELS:
These instructions should be read thoroughly before attempting installation. Set up,
installation and Performance Check should be performed by a qualified service
technician. The Manufacturer, Southbend (1100 Old Honeycutt Rd., Fuquay-Varina,
North Carolina 27526), informs you that unless the installation instructions for the
above described Southbend product are followed and performed by a qualified
service technician, (a person experienced in and knowledgeable concerning the
installation of commercial gas and/or electrical cooking equipment) then the terms and
conditions of the Manufacturer's Limited Warranty will be rendered void and no
warranty of any kind shall apply.
If the equipment has been changed, altered, modified or repaired by other than a
qualified service technician during or after the 12-month limited warranty period, then
the manufacturer shall not be liable for any incidental or consequential damages to
any person or to any property which may result from the use of the equipment
thereafter. Some States do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion thereto may not apply to
you.
In the event you have any question concerning the installation, use, care, or service of
the product, write Customer Service Department, Southbend, 1100 Old Honeycutt
Rd., Fuquay-Varina, North Carolina 27526.
INSTALLATION
USER'S GUIDE
SERVICE
PARTS
COMPACT
MRA-32C, MRA-32, MRA-32W
MRA-36, MRA-60
IMPORTANT
FOR FUTURE REFERENCE
Please complete this informa-
tion and retain this manual for
the life of the equipment.
MODEL #
SERIAL #
DATE PURCHASED
COMPACT INFRA-RED
BROILER (Manual Section BR)
Advertisement
Related Manuals for Southbend MRA-32C
Summary of Contents for Southbend MRA-32C
- Page 1 The Manufacturer, Southbend (1100 Old Honeycutt Rd., Fuquay-Varina, North Carolina 27526), informs you that unless the installation instructions for the above described Southbend product are followed and performed by a qualified service technician, (a person experienced in and knowledgeable concerning the...
- Page 2 Congratulations! You have just purchased one of the fmest pieces of heavy-duty, commercial cooking equipment on the market today. You will find that your new equipment, like all Southbend equipment, has been designed and manufactured to some of the toughest standards in the industry — those of Southbend Corporation. Each piece of Southbend equipment has been carefully engineered and designs have been verified through laboratory tests and field installations in some of the more strenuous commercial cooking applications.
- Page 3 Should any part thereof become defective as a result of normal use within the period and limits defined below, then at the option of Southbend such parts will be repaired or replaced by Southbend or its Authorized Service Agency. This warranty is subject to the following...
- Page 4 OPERATION WARNING: FOR AN APPLIANCE EQUIPPED WITH CASTERS, THE INSTALLATION SHALL BE MADE WITH A CONNECTOR THAT COMPLIES WITH THE STANDARD FOR CONNECTORS FOR MOVABLE GAS APPLIANCES. ANSI Z21.69-1987, AND A QUICK-DISCONNECT DEVICE THAT COMPLIES WITH THE STANDARD FOR QUICK-DISCONNECT DEVICES FOR USE WITH GAS FUEL, ANSI Z21.41-1978, AND ADDENDA, Z21.41a.l981 AND Z21.41b.l983.
- Page 5 MAINTENANCE WARNING: ADJUSTMENTS AND SERVICE WORK MAY BE PERFORMED ONLY BY A QUALIFIED TECHNICIAN WHO IS EXPERIENCED IN AND KNOWLEDGEABLE WITH THE OPERATION OF COMMERCIAL GAS COOKING EQUIPMENT. HOWEVER, TO ASSURE YOUR CONFIDENCE, CONTACT YOUR AUTHORIZED SERVICE AGENCY FOR RELIABLE SERVICE, DEPENDABLE ADVICE OR OTHER ASSISTANCES, AND FOR GENUINE FACTORY PARTS.
-
Page 6: Specifications
DIMENSIONS WIDTH DEPTH HEIGHT END VIEW FRONT VIEW MODEL IN INCHES IN INCHES IN INCHES MRA-32C 32" 15 3/8 " 22 7/8" Complete Unit Consists of (1) MR-L30 Leg Kit (1) MRA-30 Basic Unit MRA-32W 32" 19 1/16" 18 7/8"... - Page 7 6 IN. NOTE: For Model Nos. MRA-32C and MRA-32W a 6" clearance should be provided at the right side, since it is necessary on all models to remove the body side to gain access to the regulator and 1/8 NPT pressure test tap.
- Page 8 INSTALLATION WARNING: FOR AN APPLIANCE EQUIPPED WITH CASTERS, THE INSTALLATION SHALL BE MADE WITH A CONNECTOR THAT COMPLIES WITH THE STANDARD FOR CONNECTORS FOR MOVABLE GAS APPLIANCES, ANSI Z21.69-ANSI Z21.69-1987, AND ADDENDA, Z21.69a.l983, AND A QUICK.DISCONNECT DEVICE THAT COMPLIES WITH THE STANDARD FOR QUICK- DISCONNECT DEVICES FOR USE WITH GAS FUEL, ANSI Z21.41-1978, AND ADDENDA, Z21.41a.l981 AND Z21.41b.l983.
- Page 9 The following section covers Field Assembly instructions for the Compact Infra-Red Broiler combinations noted below and shown on Page 1, Section 1. 1. Installing legs for counter units. Page Model No. MRA-32C Assembling wall mount and attaching unit. Model No. MRA-32C Assembling flue riser and attaching unit for mounting over 32" Sectional Range.
- Page 10 INSTALLATION MODEL NO. MRA-32W DIAGRAM FOR ASSEMBLING WALL MOUNT BRACKET Install wall mount to wall using (6) sheet metal screws and (6) washers provided. Make sure screws hit wall studs. Insure wall mount is adequately secured to wall to support weight of broiler (150 Ibs.). 2.
- Page 11 INSTALLATION MODEL NO. MRA-32W DIAGRAM FOR MOUNTING BROILER TO WALL MOUNT BRACKET 1. Fasten broiler hook "A" to rear of broiler "B" with (3) slotted hex head sheet metal screws provided. 2. Prepare gas supply connection before mounting broiler "B." (See instructions on Page 3, Section 1.) 3.
- Page 12 INSTALLATION MODEL NO. MRA-32 DIAGRAM FOR MOUNTING MRS-32 SECTIONAL 32" RISER TO RANGE Front panel "A" is fastened with (4) hex head sheet metal screws. Remove screws and panel. Remove nuts and lockwasher from collar plate studs "C" on range. Lower riser onto range allowing studs "C"...
- Page 13 INSTALLATION MODEL NO. MRA.32 DIAGRAM FOR MOUNTING BROILER TO 32" SECTIONAL RANGE RISER NO. MRS-32 1. Fasten broiler hook "A" to rear of broiler "B" with (3) slotted hex head sheet metal screws provided. 2. Prepare gas supply connection before mounting broiler "B." (See instructions on Page 3, Section 1.) 3.
- Page 14 INSTALLATION MODEL NO. MRA-36 DIAGRAM FOR MOUNTING MRC-36 CAFE 36" RISER TO RANGE Front panel "A" is fastened with (4) hex head sheet metal screws. Remove screws and panel. Lower riser onto range, line up holes in riser bracket "B" with weld nut holes in range. Secure riser bracket "B" to range with (4) hex head ^,-20 screws and (4) washers (2 each side) provided.
- Page 15 INSTALLATION MODEL NO. MRA-36 DIAGRAM FOR MOUNTING BROILER TO 36" CAFE RANGE RISER NO. MRC-36 1. Fasten broiler hook "A" to rear of broiler "B" with (3) slotted hex head sheet metal screws provided. 2. Prepare gas supply connection before mounting broiler "B." (See instructions on Page 3, Section 1.) 3.
- Page 16 INSTALLATION MODEL NO. MRA-60 DIAGRAM FOR MOUNTING BROILER TO 60 ¾ " CAFE RANGE RISER NO. MRK-30 NOTE: Most 60%" riser and broiler assemblies are shipped from the factory preassembled to the range. If not, however, follow the mounting method depicted in the diagram. The following instructions should then be followed to mount a broiler to an MRK-30, 60%"...
- Page 17 COMPACT INFRA-RED BROILERS SERVICE ADJUSTMENTS WARNING: ADJUSTMENTS AND SERVICE WORK MAY BE PERFORMED ONLY BY A QUALIFIED TECHNICIAN WHO IS EXPERIENCED IN AND KNOWLEDGEABLE WITH THE OPERATION OF COMMERCIAL GAS COOKING EQUIPMENT. HOWEVER, TO ASSURE YOUR CONFIDENCE. CONTACT YOUR AUTHORIZED SERVICE AGENCY FOR RELIABLE SERVICE, DEPENDABLE ADVICE OR OTHER ASSISTANCES, AND FOR GENUINE FACTORY PARTS.
- Page 18 ADJUSTMENTS ACCESS TO SERVICEABLE PARTS: Some serviceable parts are only accessible by removing the body side and/or front. The following diagram depicts the procedure to follow should this be necessary. Body side "B" is fastened with (2) slotted hex head sheet metal screws "S, and F," for left side, or "S, and Fa" for right side, as shown.
- Page 19 Pilot outage — Clogged orifice. — Draft condition. — Incorrect orifice. — Adjustment. AT LEAST TWICE A YEAR HAVE YOUR SOUTHBEND AUTHORIZED SERVICE AGENCY CLEAN AND ADJUST THE UNIT FOR MAXIMUM PERFORMANCE. COMPCT INFRA-RED BROILERS SECTION THREE- SERVICE PAGE 3...
- Page 20 THE WARRANTY ON THIS EQUIPMENT. The serial plate is located inside unit under drip pan on left. Replacement parts may be ordered either through a Southbend Authorized Parts Distributor or a Southbend Authorized Service Agency. When ordering parts please supply the Model Number, Serial Number, Part Number, Description, plus Finish, Type of Gas and Electrical Characteristics, as applicable.
- Page 21 PARTS COMPACT BROILERS PARTS LIST 1077400 REAR DRIP SHIELD 1073498 VALVE HANDLE (1073400) 1079189 PILOT ASM. - NATURAL GAS (Old Style) 1079188 PILOT ASM. - LP GAS (Old Style) 1079167 PIUDT ORIFICE - NATURAL GAS (.026) (Old Style) 1079168 PILOT ORIFICE - PROPANE GAS (.0135) (Old Style) 4440011 SHOULDER BOLT ASM.
- Page 22 PARTS COMPACT BROILERS PARTS LIST 1074901 BURNER SIDE AIR SHIELDS 1076200 BROILER HOOK 12476 PLUG BUTTON 1099002 PILOT ADJ. VALVE (w/New Style Burners) 1160413 BEARING 1160418 MANIFOLD TUBE 3/8" O.D. 1057515 SEALING GASKET (Fiber Fax) 1160419 BURNER SUPPLY TUBE 3/8" O.D. 1168283 PILOT ADAPTER 1168281...
- Page 23 COMPACT INFRA-RED BROILER SECTION FOUR- PARTS Litho in U.S.A PAGE 4 Rev. 7-91...
- Page 24 Convection ovens Fryers Cooker/mixer kettles Cook & hold convection ovens Special & custom equipment Floor model broilers Bake & roast ovens Convection steamers Under fired broilers Pizza ovens Steam kettles Salamander broilers Ranges Tilting braising pans Cheese meters...
- Page 25 COMPACT INFRA-RED BROILER A product with the Southbend name incorporates the best in durability and low maintenance. We all recognize however, that replacement parts and occasional professional service may be necessary to extend the useful life of this unit. When service is needed, contact a Southbend Authorized Service Agency, or your dealer.