Dealer Locator Information - Wayne-Dalton TORQUEMASTER 6100 Installation Instructions And Owner's Manual

Single and double spring
Hide thumbs Also See for TORQUEMASTER 6100:
Table of Contents

Advertisement

Painting Continued....
Wood (Preparation and Painting)
These instructions apply to all Wood Doors produced and sold by Wayne-Dalton Corp. The exterior surfaces, as well as all edges must be
properly painted and maintained if satisfactory performance is to be achieved. The purpose for painting is to both protect and beautify
the substrates. These requirements for finishing are intended to achieve both functions for reasonable service life of wood doors. Wood
doors must be completely finished prior to installation, to ensure that the interior and exterior surfaces, as well as all edges of the doors
are properly protected against moisture or other contaminants. Wood doors, in a non-finished condition, must not be transported or
stored where the wood surfaces can be exposed to moisture or other contaminants.
Wood (Surface Preparation)
all surfaces must be clean, free of dust and dirt and any other contamination.
Wood (Painting)
using painter's tape, tape off all metal surfaces. a premium quality latex house based finish paint is recommended for use over the
factory latex based primer
Painting the wood surfaces with at least 2 coats of finish paint over the primer. follow paint manufacture's label directions completely
for all coatings. Once finished, remove painter's tape and touch up where necessary.
Wood (Maintenance and Refinishing)
yearly inspection of all the wood surfaces of the garage door(s) will reveal the extent of weathering and the need for refinishing. When
the finish becomes eroded or thin, clean and prime the areas of deterioration. follow up with a complete refinishing of the door(s),
according to the above directions, as well as the manufacturer's label directions. Protecting the door(s) from prolonged exposure to
moisture and sunlight is vital in extending the service life of your garage door(s).
Covered by one or more of the following Patents; 5,408,724; 5,409,051; 5,419,010; 5,495,640; 5,522,446; 5,562,141; 5,566,740;
5,568,672; 5,718,533; 6,019,269; 6,089,304; 6,644,378; 6,374,567; 6,561,256; 6,527,037; 6,640,872; 6,672,362; 6,725,898; 6,843,300;
6,915,573; 6,951,237; 7,014,386; 7,036,548; 7,059,380; 7,121,317; 7,128,123; 7,134,471; 7,134,472; 7,219,392; 7,254,868. Canadian:
2,384,936; 2,477,445; 2,495,175; 2,507,590; 2,530,701; 2,530,74; 2, 2,532,824. Other US and Foreign Patents pending
Please Do Not Return This Product To The Store
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages
business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Thank you for your purchase
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Torquemaster plus 6100 windload

Table of Contents