Table of Contents
Advertisement
20
Center bracket bushing
NOTE: If you are installing the idrive
Tools Needed:
opener with your garage door, skip this
None
step and go to your idrive
Instructions and Owner's Manual. after
completing steps 1-13 of your idrive
Installation Instructions and Owner's
Manual, rear supports will need to be
fabricated/installed to support both
horizontal tracks, see step 28.
NOTE: If you are not installing the
idrive
opener on your garage door, you
®
must install the center bracket bushing
assembly. follow these instructions for
non-idrive
®
being cam shaped the center bracket
bushing only fits one way.
slide the center bracket assembly
towards the center of the TorqueMaster
spring tube, from the right side as shown.
21
Drum Wraps/ Cable Drums
Tools Needed:
IMPORTANT: RIGhT aND lEfT haND
Tape Measure
Is alWays DETERMINED fROM INsIDE
ThE GaRaGE lOOkING OuT.
step ladder
Drum wraps are identified as right hand and left
hand.
slide the left hand drum wrap over the left side
of the TorqueMaster
with the tabs facing left. Continue sliding the
left hand drum wrap towards the center of the
TorqueMaster
Repeat for right hand side.
shake the TorqueMaster
assembly gently to extend the winding shafts out
about 5" on each side. for single spring
applications, there will be no left hand spring in
the TorqueMaster
lift the TorqueMaster
and rest it on the top of the flagangles.
NOTE: Cable drums are marked right and left
hand. Cable drums and TorqueMaster
spring tube assembly are cam shaped to fit
together only one way.
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
®
Installation
®
®
operated garage doors.
®
®
spring tube assembly
spring tube assembly.
®
Plus spring tube
®
Plus spring tube assembly.
®
Plus spring tube assembly
®
®
Plus
TORquEMasTER
®
sPRING TubE
RIGhT haND
DRuM WRaP
lEfT haND
DRuM WRaP
WINDING shafT
1-1/2 WRaPs
TORquEMasTER
Plus
®
sPRING TubE assEMbly
(CaM PEak sTRaIGhT uP)
RIGhT DRuM
COuNTERbalaNCE CablE
CENTER
bRaCkET
assEMbly
TORquEMasTER
®
sPRING TubE
CENTER
bRaCkET
bushING
lEfT haND DRuM WRaP
TORquEMasTER
sPRING TubE
assEMbly
Tabs
TORquEMasTER
®
sPRING TubE assEMbly
®
21
Advertisement
Table of Contents
