Table of Contents
Advertisement
18
Adjusting Top Roller Slide
Tools Needed:
With horizontal tracks installed, you can
now adjust the top roller slide.
Power Drill
7/16" socket
Vertically align the top section of the
Driver
door with the lower sections. Once
aligned, position the top roller,
step ladder
out against the horizontal track, while
keeping the roller slide parallel with the
section.
Maintaining the slide's position,
tighten the (2) 1/4" - 14 x 5/8" self
tapping screws.
19
TorqueMaster
Tools Needed:
TorqueMaster
and pre-assembled inside the
None
TorqueMaster
To install, lay the TorqueMaster
tube on the floor (inside garage) in front
of the door with the labeled end to the
left.
20
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Spring Tube
®
springs come lubricated
®
spring tube.
®
spring
®
TOP ROllER
slIDE
TOP sECTION
CORRECT
TORquEMasTER
sPRING TubE
labElED END
1/4"-14 x 5/8" sElf
TaPPING sCREWs
TOP sECTION
INCORRECT
®
Advertisement
Table of Contents
