Signalling And Error Correction; Signalling - AEG PROTECT C. 10000 Operating Instructions Manual

8

Signalling and Error Correction

8.1

Signalling

1.
2.
3.
4.
OFF push button (OFF): Press the OFF switch
for about 2 seconds to switch on the UPS
ON push button (ON): Press the ON switch for
about 2 seconds to switch off the UPS.
Deactivate acoustic alarm: By pressing this
switch for about 2 seconds during the alarm an
acoustic alarm can be deactivated.
UPS Test: To execute an UPS self test press this
button for about 2 seconds in the normal operation
mode.
LED Bypass: The orange-coloured LED lights up
when the UPS system is supplying voltage
provided by the mains power via the bypass.
LED Inverter: The green-coloured LED lights up if
the UPS system is supplying voltage provided by
the mains power via the inverter.
12
11
10
9
8
7
3
6
4
5
1
2
43