Notes On These Operating Instructions - AEG PROTECT C. 10000 Operating Instructions Manual

1 Notes on these Operating
Instructions
Duty to Provide Information
These operating instructions will help you to install and
operate
PROTECT C. 6000 (S) or PROTECT C. 10000 (S) as well as
the associated external battery units PROTECT C. 6000BP or
PROTECT C. 10000BP – all referred to as PROTECT C. in
this document – safely and properly, and for its intended
purpose. These operating instructions contain important
information necessary to avoid dangers during operation.
Please read these instructions carefully prior to
commissioning!
These operating instructions are a composite part of the
PROTECT C.
The owner of this unit is obliged to communicate the full
content of these operating instructions to all personnel
transporting or starting the PROTECT C. or performing main-
tenance or any other work on the unit.
Validity
These operating instructions comply with the current technical
specifications of the PROTECT C. at the time of delivery. The
contents do not constitute a subject matter of the contract, but
serve for information purposes only.
Warranty and Liability
We reserve the right to alter any specifications given in these
operating instructions, especially with regard to technical data
and operation, prior to start-up or as a result of service work.
Claims in connection with supplied goods must be submitted
within one week of receipt, along with the packing slip.
Subsequent claims cannot be considered.
The warranty does not apply to damage caused by non-
compliance with these instructions (such damage also
includes damaging the warranty seal). AEG will accept no
the Uninterruptible Power Supply
4
(UPS)