Using Wep - Ruckus Wireless ZoneFlex 7762-S User Manual
802.11g access point; 802.11g outdoor access point; 802.11n access point; dual band 802.11n access point; dual band 802.11n outdoor access point; dual band 802.11n outdoor sector access point; 2.4ghz 802.11n smart wi-fi access point; dual band 802.11n sma
Hide thumbs
Also See for ZoneFlex 7762-S:
- Installation manual (70 pages) ,
- User manual (149 pages) ,
- Datasheet (5 pages)
Table of Contents
Advertisement
Configuring the Access Point
Configuring WLAN Settings
Figure 34.
WLAN settings
Using WEP
CAUTION:
WEP encryption has been proven to be easily circumvented. Therefore,
Ruckus Wireless recommends using WPA whenever possible, and only use WEP if your
client devices do not support WPA.
WEP Using WEP encryption limits the performance of the AP to 802.11g
CAUTION:
rates. If you select WEP encryption for a WLAN, wireless devices that are capable of
faster 802.11n transfer rates will be limited to 802.11g rates.
To configure WLAN-specific WEP encryption settings
1. Go to Configuration > Wireless. The Configuration :: Wireless :: Common page
appears.
NOTE: If you are using a ZoneFlex 7363/7762/7962 AP, go to Configuration > Radio
2.4G or Configuration > Radio 5G.
2. Click the Wireless # tab that you want to configure. The Configuration :: Wireless
:: Wireless[#] page appears.
68
Hide quick links:
Advertisement
Table of Contents
