GarrettCom Magnum Quad-Series Installation And User Manual page 32

Magnum Quad-Series Fiber Switches
Step 2. Remove Chassis Cover
The Magnum Q-Series chassis are combined
a ssembled together with the help of 20 Philips head screws. There are 7 screws located
o n front-top of the unit and three screws each on the left and right edges. Remove these
screws. Once these are removed, the top cover is easily lifted off the chassis base. When
the chassis top cover has been rem
Magnum QS5116
Fiber Switch
GA RRETT
Caution: Be careful not to disturb the power supply.
Looking
Q PM connector sockets along with two stand-offs for each QPM card position. There are
f our QPM slots located on the front of the QS5116 model, whereas QS580 and QS5108
has two QPM slots in the front. (See Figure 3.9.1b).
AC Power Input
Cooling Fan
Left
Side
LED Status Slot
Figure 3.9.1b: Magnum QS5116, Top View with Chassis Cover
www GarrettCom com . .
oved, the interior of the unit is exposed.
20 Phillips Head Screws on Top
TopChassis Cover
Power Input
PWR
Figure 3.9.1a: Removing Chassis Cover
down into the Magnum Q-Series unit, notice
Back of Unit
Power Supply Board
Media Connector
Eight QPM Slots
Installation and User Guide (06/03)
with top and bottom part and
with electronic
elements
Front of Unit
26
that there are individual
Right
Side