Quad Port Module (Qpm) Installation; Preparation For Installing And Removing Qpms - GarrettCom Magnum Quad-Series Installation And User Manual

Magnum Quad-Series Fiber Switches
When connecting the Ethernet cabling, there is no need to power down the
unit. Individual segments can be connected or disconnected without concern for AC
power-related problems or damage to the unit.
Power supply options are available to suit the Quad-Series Switches to special
high-availability communications and/or heavy industrial-grade applications, includin
* -48VDC, 24VDC & 125VDC with single
* -48VDC, 24VDC & 125VDC with dual-source DC input,
See the Appendices of this manual for more details. Use an RFQ for other variations.
3.9

Quad Port Module (QPM) Installation

The Magnum Q-Series Fiber Switches are normally
with all required QPM modules installed. There may be situations where QPM cards
need to be added or replaced. In cases where additional QPM cards are needed, the face
plate for an available front-mounted slot must be remove
descr ibes this operation.
3.9.1

Preparation for Installing and Removing QPMs

Caution- Avoid Sta
equipment) are sensitive to static discharge. Use proper ESD measures
when handling port modules.
Step 1. Make sure the QPM Card package has all necessary accessories to install it
properly. The QPM Card package for field installation comes along w
QPM Card, two 7/16 stand-offs , two #4-40 Pan-Head screws, two #4-40 bla
color Flat-head screws and two
www GarrettCom com . .
STOP!!!
Be sure the power cord is unplugged
from the chassis before attempting to remove
and/or replace any QPM cards.
Failure to do so may result in damage to the u
and will voi
tic Discharge: The port modules (like most electronic
Installation and User Guide (06/03)
DC input,
d. The following procedure
d t he warranty.
Headers pin.
25
received from the factory
nit
ith a
g:
ck