Agency Approvals - GarrettCom Magnum Quad-Series Installation And User Manual

Magnum quad-series fiber switches

Hide thumbs

Table Of Contents

Table of Contents

Magnum Quad-Series Fiber Switches

Fiber Single-mode connector types:

Fiber Port, SC-type: Fiber optic single-mode, 100BASE-FX

Manual switch-selections and jumpers

Up-link Push-button: Crossover sw for one RJ-45 port per QPM-RJ45

Fiber default: Full-duplex (Internal jumpers may select HDX mode)

Copper default: Auto-negotiation (Internal jumpers may alternatively

select fixed 100Mb full-duplex, or fixed 100Mbps half-duplex)

LEDs: Per Port

LK: Steady ON when media link is operational

ACT: ON with receiver port activity

FDX/HDX: ON = Full-Duplex Mode

100/10: ON = 100Mbps speed

Operating Environment

Ambient Temperature: 32° to 120° F (0° to 50°C)

Storage Temperature: -40°to 185°F (-40°to 85°C)

Ambient Relative Humidity: 10% to 95% (non-condensing)

Packaging

Enclosure: Rugged High strength metal. Suitable for stand-alone or rack-

Dimensions: 1.75 in H x 17.0 in W x 9.13 in D

Weight:

Cooling method: Fan cooled, @ 9 cfm

Power Supply (Internal)

AC Power Connector: IEC-type, male recessed at rear of chassis,

Input Voltage:

Input Frequency: 47 to 63 Hz (auto-ranging)

Power Consumption: 20 watts typical (8 port model)

Redundant power supplies available as options

DC Power Supply (Options)

-48VDC Power Input Voltage : 36 to 70 VDC

24VDC Power Input Voltage : 20 to 36VDC

125VDC Power Input Voltage : 120 to 160VDC

Std. Terminal Block : " -, GND, + "

Power Consumption: same as for AC models, see above

For Dual Source and Redundant DC for –48VDC, 24VDC Power &

125VDC supply options (Optional), see Appendices

For optional 23" Telco rack-mount brackets, order Model # RMB-23W