Connection To Nics, That Support Auto-Negotiation; Table-Top Or Shelf Mounting; Rack-Mounting - GarrettCom Magnum 8000X Installation And User Manual

Mixed-media fiber hubs
Table of Contents

Advertisement

Magnum 8000X Mixed-Media Fiber Hubs
Table 3.6.1c: Maximum segment lengths for common network configurations
Number
Repeater
of Hubs
Hop Count
1
1
2
2
2
2
3+
3
Instructions for connecting the Magnum 8000X Mixed-Media Hubs to the
various Fast Ethernet media are given in the following sections.
3.6.2
Connections to NICs which support Auto-Negotiation
The Magnum 8000X Mixed-Media Hub will function properly with NICs
(Network Interface Cards) which support Auto-Negotiation. The Magnum 8000X will
establish link with any NIC which can send and receive the Fast Link Pulse (FLP)
coding for the 100BASE-TX signaling system. When connecting a NIC to the 8000X, it
may be necessary to reload the NIC drivers on the user device if the NIC has been
communicating with a protocol other than 100BASE-TX (such as 10BASE-T). When
100Mb operation is agreed and in use, the 100Mb LINK/ACT LED is illuminated,
steady ON if no traffic or blinking when there is traffic.
3.7

Table-Top or Shelf Mounting

The Magnum 8000X fiber Hub can be easily mounted on a table-top or any
suitable horizontal surface, and has four rubber feet to provide stability without
scratching finished surfaces.
3.8

Rack-Mounting

Installation of a
Magnum 8000X mixed-
media fiber Hub in a 19" rack is a simple procedure. The units are 1U (1.70") high.
When properly installed, the front-mounted LED status indicators should be in plain
view and easy to read. Rack-mount installation requires special 19" rack-mounted
brackets and screws (included with each 8000X unit). The brackets attach to the front
sides of the hub, which is then fastened into a standard 19" RETMA rack.
.
.
www GarrettCom com
Max. User
Max. Inter-
Segment
Repeater (Cascade)
Lengths (m)
Length (m)
100.0
100.0
92.0
60.0
PWR
R L S
Magnum 8000X
R L S
BRD
Mixed Media Hub
1
10 100
ACT
COL
GARRETT
27
Installation and User Guide (05/ 02)
n.a.
All ports TX
5.0
All ports TX
20.0
All ports TX
1.0
All ports TX
R L
R L
R L
R L
R L S
R L S
R L
R L
R L
Notes
R L
R L
R L
R L
R L

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magnum 8000x-a

Table of Contents

Save PDF