Authenticator State - D-Link xStack DES-3200-10 User Manual

xStack
BadAuthenticators
PendingRequests
Timeouts
UnknownTypes
PacketsDropped

Authenticator State

The following section describes the 802.1X State on the Switch.
To view the Authenticator State, click Monitoring > Port Access Control > Authenticator State:
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
responses.
The number of RADIUS Accounting-Response packets, which contained invalid
authenticators, received from this server.
The number of RADIUS Accounting-Request packets sent to this server that have
not yet timed out or received a response. This variable is incremented when an
Accounting-Request is sent and decremented due to receipt of an Accounting-
Response, a timeout or a retransmission.
The number of accounting timeouts to this server. After a timeout it may retry to the
same server, send to a different server, or give up. A retry to the same server is
counted as a retransmit as well as a timeout. A send to a different server is counted
as an Accounting-Request as well as a timeout.
The number of RADIUS packets of unknown type which were received from this
server on the accounting port.
The number of RADIUS packets, which were received from this server on the
accounting port and dropped for some other reason.
Figure 7 - 19. Authenticator State window
200