Authenticator State - D-Link des-3010f User Manual
Layer 2 managed 8/16/24-port 10/100mbps fast ethernet switch with optional slots
Hide thumbs
Also See for des-3010f:
- Command line interface manual (231 pages) ,
- Manual (225 pages) ,
- Command line interface reference manual (175 pages)
Table of Contents
Advertisement
DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Rx RespId
Rx Resp
Rx Invalid
Rx Error
Last Version
Last Source
Authenticator State
The following section describes the 802.1X Status on the Switch. To view the Authenticator State, click Monitoring > Port
Access Control > Authenticator State.
this Authenticator.
The number of EAP Resp/Id frames that have been received by this Authenticator.
The number of valid EAP Response frames (other than Resp/Id frames) that have been
received by this Authenticator.
The number of EAPOL frames that have been received by this Authenticator in which the
frame type is not recognized.
The number of EAPOL frames that have been received by this Authenticator in which the
Packet Body Length field is invalid.
The protocol version number carried in the most recently received EAPOL frame.
The source MAC address carried in the most recently received EAPOL frame.
Figure 11- 27. Authenticator State window – Port-based 802.1x
162
Advertisement
Table of Contents
