Smtp Settings; Smtp Service Settings - D-Link xStack DES-3200-10 User Manual

Layer 2 managed ethernet switch
Hide thumbs Also See for xStack DES-3200-10:
Table of Contents

Advertisement

xStack

SMTP Settings

SMTP or Simple Mail Transfer Protocol is a function of the Switch that will send switch events to mail recipients based
on e-mail addresses entered in the window below. The Switch is to be configured as a client of SMTP while the server
is a remote device that will receive messages from the Switch, place the appropriate information into an e-mail and
deliver it to recipients configured on the Switch. This can benefit the Switch administrator by simplifying the
management of small workgroups or wiring closets, increasing the speed of handling emergency Switch events, and
enhancing security by recording questionable events occurring on the Switch.
Users can set up the SMTP server for the Switch, along with setting e-mail addresses to which switch log files can be
sent when a problem arises on the Switch.

SMTP Service Settings

To view the following window, click Configuration > SMTP Service Settings:
The following parameters may be configured or viewed:
Parameter
Description
Use the radio button to enable or disable the SMTP service on this device.
SMTP State
Enter the IP address of the SMTP server on a remote device. This will be the device that sends
SMTP Server
out the mail for you.
Address
Enter the virtual port number that the Switch will connect with on the SMTP server. The common
SMTP Server Port
port number for SMTP is 25, yet a value between 1 and 65535 can be chosen.
(1-65535)
Enter the e-mail address from which mail messages will be sent. This address will be the "from"
Self Mail Address
address on the e-mail message sent to a recipient. Only one self-mail address can be configured
for this Switch. This string can be no more that 64 alphanumeric characters.
Enter an e-mail address and click the Add button. Up to eight e-mail addresses can be added
Add A Mail
per Switch. To delete these addresses from the Switch, click the corresponding Delete button in
Receiver
the SMTP Mail Receiver Address table at the bottom of the window.
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 2 - 28. SMTP Service Settings window
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents