xStack
Priority Mapping
This window is used to set up Priority Mapping.
To view this window, click QoS > Priority Mapping:
The following parameter may be set:
Parameter
Description
Select a range of ports to configure.
From Port/To
Port
Tick the None check box neither Ethernet nor IP Priority mapping is desired.
Priority
Tick the Ethernet Priority check box to set up 802.1p mapping.
Ethernet Priority
Tick the IP Priority check box and then use the drop-down menu to select either TOS or DSCP
IP Priority
mapping.
Click Apply to set the changes.
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 4 - 7. Priority Mapping window
112