Smtp Service; Mac Notification Settings; Mac Notification Global Settings; Mac Notification Port Settings - D-Link xStack DES-3200-10 User Manual

xStack

SMTP Service

This window is used to test the SMTP Service Settings configured in the previous window.
To view the following window, click Configuration > SMTP Service:
To test to see if the SMTP settings are working properly, enter a Subject, Content, and then click the Send button.

MAC Notification Settings

MAC Notification is used to monitor MAC addresses learned and entered into the forwarding database. To globally set
MAC notification on the Switch, open the following window by opening the MAC Notification Settings in the
Configuration folder.

MAC Notification Global Settings

To configure the MAC Notification Global Settings for the Switch, click Configuration > MAC Notification Settings >
MAC Notification Global Settings
The following parameters may be viewed and modified:
Parameter
State
Interval
(1-2147483647 sec)
History Size
(1-500)
Click Apply to implement changes.

MAC Notification Port Settings

To configure the MAC Notification Port Settings for the Switch, click Configuration > MAC Notification Settings >
MAC Notification Port Settings:
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 2 - 29. SMTP Service window
Figure 2 - 30. MAC Notification Global Settings window
Description
Enable or disable MAC notification globally on the Switch.
The time in seconds between notifications.
The maximum number of entries listed in the history log used for notification. Up to 500
entries can be specified.
36