Packet Size - D-Link xStack DES-3200-10 User Manual

xStack
To select a port to view these statistics for, select the port by using the Port pull-down menu. The user may also use
the real-time graphic of the Switch at the top of the Web page by simply clicking on a port.
Change the view parameters as follows:
Parameter
Port
Time Interval
Record Number
Show/Hide

Packet Size

The Web Manager allows packets received by the Switch, arranged in six groups and classed by size, to be viewed as
either a line graph or a table. Two windows are offered. To select a port to view these statistics for, select the port by
using the Port pull-down menu. The user may also use the real-time graphic of the Switch at the top of the Web page
by simply clicking on a port.
To view the packet size windows, click Monitoring > Packet Size:
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 7 - 3. Port Utilization window
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value
is 200.
Check whether or not to display Utilization.
186