User Accounts - D-Link xStack DES-3200-10 User Manual

xStack

User Accounts

Use this window to control user privileges, create new users, and view existing User Accounts.
To view this window, click Configuration > User Accounts:
The following fields can be set:
Parameter
The name of the user, an alphanumeric string of up to 15 characters.
User Name
Enter a password for the new user.
Password
There are two levels of user privileges, Admin and User. Some features and selections available
Access Right
to users with Admin privileges may not be available to those with User level privileges.
(Table 2 - 1 below summarizes Admin and User level privileges)
Retype the new password.
Confirm
Password
To add a new user, enter the appropriate information and click Apply. To modify or delete an existing user, click on
the Edit button for that user.
Admin and User Privileges
There are two levels of user privileges, Admin and User. Some menu selections available to users with Admin
privileges may not be available to those with User privileges.
The following table summarizes the Admin and User privileges:
Management
Configuration
Network Monitoring
Community Strings and Trap Stations
Update Firmware and Configuration Files
System Utilities
Factory Reset
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 2 - 12. User Accounts window
Description
NOTICE: In case of lost passwords or password corruption, please refer to the
"Password Recovery Procedure" Appendix in the DES-3200-10/18/28/28F CLI
Reference Manual which will guide you through the steps necessary to resolve
this issue.
Admin
Yes
Yes
Yes
Yes
Yes
Yes
22
User
Read-only
Read-only
Read-only
No
No
No