Dos Prevention Settings - D-Link xStack DES-3200-10 User Manual

xStack

DoS Prevention Settings

The Switch supports Denial of Service (DoS) prevention to mitigate DoD attacks from hackers or other malicious
sources.
To view this window, click Security > DoS Prevention Settings:
Set the following parameters and then click Apply:
Parameter
DoS Prevention Trap
Log
Type
Action
Port
Priority (0-7)
Rx Rate (64-1024000)
State
Clear
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 5 - 43. DoS Prevention Settings window
Description
Use the radio button to enable or disable this feature.
Tick the check box for each type of DoS attack: Land Attack, Blat Attack, Smurf Attack, TCP
Null Scan, TCP Xmasscan, TCP SYNFIN, TCP SYN SrcPort less 1024, and All.
Toggle between Drop and Mirror.
Select the Port which the log will be mirrored to.
Select the Priority for the mirror port.
Enter a value between 64 and 1024000 or tick the No Limit check box.
Toggle to enable or disable DoS Prevention.
Click to clear the DoS prevention trap logs for the corresponding types of DoS attacks.
149