802.1X Settings - D-Link xStack DES-3200-10 User Manual

xStack

802.1X Settings

To configure the 802.1X Settings, click Security > 802.1X > 802.1X Settings:
This window allows you to set the following features:
Parameter Description
Use the radio buttons to enable or disable 802.1X.
802.1X
Choose the 802.1X authentication mode, Port Based, or MAC Based.
Auth Mode
Choose the authentication protocol, Local or RADIUS EAP.
Auth Protocol
Enter the port or ports to be set.
From Port/To
Port
This allows you to set the number of seconds that the Switch remains in the quiet state following
QuietPeriod
a failed authentication exchange with the client. The default setting is 60 seconds.
(0-65535)
This value determines timeout conditions in the exchanges between the Authenticator and the
SuppTimeout
client. The default setting is 30 seconds.
(1-65535)
This value determines timeout conditions in the exchanges between the Authenticator and the
ServerTimeout
authentication server. The default setting is 30 seconds.
(1-65535)
The maximum number of times that the Switch will retransmit an EAP Request to the client
MaxReq (1-10)
before it times out of the authentication sessions. The default setting is 2.
This sets the TxPeriod of time for the authenticator PAE state machine. This value determines
TxPeriod
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 5 - 19. 802.1X Settings window
127