D-Link xStack DES-3200-10 User Manual page 159

xStack
Figure 6 - 12. Access Profile Detail Information window for IPv4 example
To return to the Access Profile List window, click Show All Profiles. To add a rule to a previously configured entry,
click on the corresponding Add/View Rules button, and then click Add Rule on the Access Rule List window, which
will reveal the following window:
The following parameters may be configured for the IP (IPv4) filter:
Parameter
Access ID (1-65535)
VLAN Name
VLAN ID (1-4094)
Source IP Address
Source IP Mask
Destination IP
Address
Destination IP Mask
DSCP
ICMP
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 6 - 13. Add Access Rule window for IPv4 example
Description
Type in a unique identifier number for this access. This value can be set from 1 to 65535.
Specifies a VLAN name.
Mask ____ (0-FFF) – Specifies a VLAN ID.
Specifies an IP address for the source IP address.
Specifies an IP address mask for the source IP address.
Specifies an IP address for the destination IP address.
Specifies a destination IP address mask for the destination IP address.
Selecting this option instructs the Switch to examine the DiffServ Code part of each packet
header and use this as the criteria, or part of the criterion for forwarding.
Select ICMP to instruct the Switch to examine the Internet Control Message Protocol (ICMP)
field in each frame's header.
ICMP Type - Specifies that the Switch will examine each frame's ICMP Type field.
158