D-Link xStack DES-3200-10 User Manual page 67

xStack
Advertisement
Port Settings
Tagged
Untagged
Forbidden
Not Member
Click Apply to implement changes made.
To search for a VLAN, click the Find VLAN tab at the top of the window (see below), enter a VLAN ID, and click Find
to display the settings for a previously configured VLAN.
To create a VLAN Batch entry, click the VLAN Batch Settings tab at the top of the window, which will display the
following window:
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
VLAN Name should be no more than 32 characters in length.
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Allows an individual port to be specified as member of a VLAN.
Specifies the port as 802.1Q tagged. Checking the box will designate the port as Tagged.
Specifies the port as 802.1Q untagged. Checking the box will designate the port as untagged.
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
Allows an individual port to be specified as a non-VLAN member.
Figure 3 - 9. 802.1Q Static VLAN window – Find VLAN tab
66